QDX � Submersible De-watering Pump Submersible de watering pump with float switch to remove water from low lying areas like sump, basement
etc.
Features
Designed with closed impeller
Float switch to auto start when flooding starts and stop when level goes down.
Built-in strainer
Pump can handle solid size up to 10 mm
Motor comes with IP 68 Protection & Class F insulation
Available in single phase 220 V +/-10% with overload protector as well as three phase 415V +/-10%. Three phase has to be installed with control panel having protection like single phase
preventor, overload protection, reverse rotation, dry run protection etc
Applications
Municipal Drainage water
Basement de-watering in Hotels Hospitals, IT Park etc
De-watering in industrial areas
De watering in construction sites
Material
Pump Casing : Aluminum with SS shroud /SS 316/SS 304
Motor Bracket : Cast Iron/ Aluminum
Impeller : Cast Iron
Shaft : CS 45#
Mechanical Seal : SiC vs. SIC/ Carbon vs. Ceramic + (Double) NBR elastomers or viton
Range
Flow up to 45 m3/h
Head up to 35 m
Liquid temperature up to 40 0 C
Working Pressure up to 6 bar
Submergence depth up to 5m
Solid size up to 10 mm
WQ(D)
� Sewage Submersible Pump WQ(D) is complete line of waste water submersible pump to handle sewage, effluent & other dirty liquids.
Features
Designed with double channel impeller
Pump can handle solid size up to 100 mm
Motor comes with IP 68 Protection & Class F insulation
Available in single phase 220V +/-10% in smaller rating with overload protector as well as three phase 415V +/-10%.Three phase has to be installed with control panel having protection like single phase
preventor, overload protection, reverse rotation, level switches, dry run protection etc
Installation with quick discharge coupling and duck foot bend is available as option
Applications
Drainage Water
Septic Tank
Sludge in Sewage treatment plants
Raw sewage with Fibers in Sewage treatment plants
Waste water in garages and service station
Effluent treatment plants
Material
Pump Casing : Cast Iron
Motor Bracket : Cast Iron
Impeller : Cast Iron
Shaft : CS 45#
Mechanical Seal : SiC vs. SIC/Carbon vs. Ceramic + NBR (Double) elastomers
Range
Flow up to 144m3/hr
Head up to 40m
Liquid temperature up to 40�C
Working Pressure up to 8 bar
Submergence depth up to 5m
Solid
size up to 80 mm
WQ (S)/(LS)
- Stainless steel Sewage Submersible pump WQ (S)/(LS) is a range of SS316 non clog submersible pump mainly to handle corrosive effluent
Features
Designed with double channel impeller
Pump can handle solid size up to 80 mm
Motor comes with IP 68 Protection & Class F insulation
Available in single phase 220V +/-10% in smaller rating with overload protector as well as three phase 415V +/-10%.Three phase has to be installed with control panel having protection like single phase
preventor, overload protection, reverse rotation, level switches, dry run protection etc
Installation with quick discharge coupling and duck foot bend is available as option
Applications
Septic Tank
Sludge in Sewage treatment plants
Effluent treatment plants
Material
Pump Casing : SS 304/SS 316
Motor Bracket : Cast Iron
Impeller : SS 304/SS 316
Shaft : SS
Mechanical Seal : SiC vs. SIC/Carbon vs. Ceramic viton (Double)
Range
Flow up to 300m3/hr
Head up to 50m
Liquid temperature up to 40�C
Working Pressure up to 8 bar
Submergence depth up to 5m
Solid size up to 100 mm
QW
- Sewage Submersible pump QW is a range of bigger submersible pumps up to 300kw to handle waste water like sewage & effluents.
Features
Designed with double channel impeller
Pump can handle solid size up to 100 mm
Motor comes with IP 68 Protection & Class F insulation
Available in single phase 220V +/-10% in smaller rating with overload protector as well as three phase 415V +/-10%.Three phase has to be installed with control panel having protection like single phase
preventor, overload protection, reverse rotation, level switches, dry run protection etc
Installation with quick discharge coupling and duck foot bend is available as option
Applications
Drainage Water
Septic Tank
Sludge in Sewage treatment plants
Raw sewage with Fibers in Sewage treatment plants
Effluent treatment plants
Material
Pump Casing : Cast Iron
Motor Bracket : Cast Iron
Impeller : Cast Iron
Shaft : CS 45#
Mechanical
Seal : SiC vs. SIC/Carbon vs. Ceramic +
(Double) NBR elastomers
Range
Flow up to 4000 m3/hr
Head up to 50m
Liquid temperature up to 40�C
Working Pressure up to 8 bar
Submergence depth up to 5m
Solid size up to 100 mm
WQAS
� Submersible Grinder Pump Heavy Duty submersible sewage grinder pumps are designed with a grinder system which grinds solids into small pieces so that they can be led away through pipes of a relatively small diameter.
Features
Designed with semi-open impeller & Grinder system
Grinder System to cut fibrous material into small pieces so that small discharge pipe can be used
Smart Grinder system ensures quick & easy impeller clearance adjustment in order to maintain peak performance
Stainless steel clamp enables quick & easy dismantling of pump & motor unit Also enables 180 degree rotation of motor housing.
Specially designed lifting handles
Built in Thermal Protection in the motor winding to provide protection against overheating
Heavy duty Single row bearing greased for life in pump up to 1.5 KW and double row angular contact bearing for bigger pumps
Hermetically sealed polyurethane filled cable plug connection which ensures that no liquid will enter into motor.
Motor are with IP 68 Protection & Class F insulation
Available in single phase 220 V +/-10% with overload protection as well as three phase 415V +/-10%. Three phase has to be installed with control panel having protection like single phase
preventor, overload protection, reverse rotation, level switches interlocking, dry run protection etc
Applications
Wastewater with discharge from water closets
Sewage & kitchen waste from restaurants, hotels, IT parks, camping sites, etc.
Material
Pump Casing : Cast Iron
Motor Bracket : Cast Iron
Impeller : Cast Iron
Grinding cutter High Tensile
Stee
Shaft : CS 45#
Mechanical Seal : SiC vs. SIC/Carbon vs. ceramic (Double) + NBR elastomer
Range
Flow up to 28 m3/h
Head up to 40 m
Liquid temperature up to 40' C
AS
� Sewage Submersible Pump AS is single channel cutting impeller to handle waste water containing fibrous material like Tissue papers, napkins etc.
Features
Designed with single channel cutting impeller
Pump can handle solid size up to 40 mm as well as short fibers
Motor coms with IP 68 Protection & class F insulation
Available in single phase 220 V+/-10% with overload protector in smaller rating s as well as three phase 415V +/-10%. Three phase has to be installed with control panel having protection like single phase
preventor, overload protection, reverse rotation, level switches, dry run protection etc
Applications
Septic Tank
Sludge in Sewage treatment plant
Raw sewage with Fibers
Waste water in garages and service station
Effluent treatment plants
Material
Pump Casing : Cast Iron
Motor Bracket : Cast Iron
Impeller : Cast Iron
Shaft : CS 45#
Mechanical Seal : SiC vs. SIC/Carbon vs. ceramic + (Double)
NBR elastomers
Range
Flow up to 145m3/hr
Head up to 28 m
Liquid temperature up to 40' C
Working Pressure up to 6 bar
Submergence depth up to 5 m
Solid size up to 40 mm
QY
- Multistage Submersible De-watering pump Designed with motor at lower part & multistage pump at upper part from remove water from great depth like construction sites & mines.
Features
Multistage Submersible De-watering pump designed with closed impeller
Motor comes with IP 68 Protection & class F insulation
Available three phase 415V +/-10%. Three phase has to be installed with control panel having protection like single phase
preventor, overload protection, reverse rotation, level switches interlocking,, dry run protection etc
Applications
Drainage Water in sump with very large depth
Mine Dewatering
De watering of construction sites
Material
Pump Casing : Cast Iron/SS 316
Motor
Bracket : Cast Iron/SS 316
Impeller : Cast Iron/SS 316
Shaft : CS 45#/SS 316
Mechanical Seal : SiC vs. SIC/Carbon vs. (Double) Ceramic
+ NBR elastomers
